Wichtig: Es muss ein funktionstüchtiges RAID bestehen, NFS ist nicht verfügbar bei einem ZFS formatiertem RAID.
- Aktivieren Sie den NFS-Dienst im Network Services Menü - Geben Sie das Share für NFS frei - Fügen Sie die Client-IP auf dem NAS hinzu mit den benötigten Rechten. - Mounten Sie das Share auf dem Client mit dem folgenden Kommando (Linux):
NFS3: mount -t nfs3 IP_Adresse:/raid0/data/_NAS_NFS_Exports_/Share /mountpoint NFS4: mount -t nfs4 IP_Adresse:/Share /mountpoint
Die Inhalte des Shares sind nun unter dem Mountpoint verfügbar.
Important: You must have a funcitonal RAID, the RAID cannot use NFS if it is ZFS formatted.
- Enable the NFS-Service in the Network Services Menu - Enable NFS-Sharing for the folder - Add the Client's IP-Address on the NAS with the needed options - Mount the share on the client using the following command (Linux):
NFS3: mount -t nfs3 IP_Adresse:/raid0/data/_NAS_NFS_Exports_/Share /mountpoint NFS4: mount -t nfs4 IP_Adresse:/Share /mountpoint
The data in the share can now be accessed using the mountpoint.
|